E12000002 · England

Heat pumps across LA16 (Askam-in-furness) postcode area: 2026 grant + cost guide

By Jim FellLast updated:

TL;DR

  • BUS grant of £7,500 toward an air-source heat pump applies in LA16 (Askam-in-furness) (England).
  • Median EPC band across 824 local properties: D.
  • 66% of homes sit at band D or below — typical retrofit candidates.
  • Top property band in LA16 (Askam-in-furness): D (50%).
  • MCS-certified installer required for a binding heat-loss quote.

What the EPC data shows for LA16 (Askam-in-furness)

We’ve aggregated the current Energy Performance Certificate band for 824 properties in LA16 (Askam-in-furness), drawn live from the GOV.UK EPC Register. The median home in our sample sits at band D, with 50% falling into band D and 23% in band C. Around 66% of homes are at band D or below — the cohort with the most realistic retrofit upside.

EPC band distribution across 824 properties in LA16 (Askam-in-furness)
BandPropertiesShareRetrofit context
Band A10.1%Already exceptional; heat pump replaces fossil heat directly
Band B9211.2%Strong fabric; heat-pump-ready after minor checks
Band C19123.2%Typical retrofit candidate; small upgrades likely
Band D41550.4%Insulation prerequisites likely; well-suited post-upgrade
Band E10012.1%Insulation recommendations typically required for BUS
Band F212.5%Significant fabric improvements before heat pump fit
Band G40.5%Fabric-first retrofit before any heat-pump consideration
EPC band distribution across 824 properties in LA16 (Askam-in-furness)Source: GOV.UK EPC Register. Sample collected 2026-05-14.

The typical LA16 (Askam-in-furness) home

What the EPC data shows beyond the headline rating — useful context for sizing a heat-pump install.

  • Floor area: median 88 (25th–75th percentile: 72115 m²). Heat-pump sizing scales roughly with floor area — expect a 5–8 kW unit at the median.
  • Current heating cost: median £813/yr 585– £1,118 typical range). The number an installer’s running-cost saving projection sits against.
  • Mains gas connection: 97% of properties. Most homes are replacing a working gas boiler — the payback case depends heavily on tariff choice + smart scheduling.
  • Property type mix: Detached 33%, End-Terrace 9%, Mid-Terrace 32%, Semi-Detached 24%.
  • Dominant age band: England and Wales: 1900-1929 (22% of homes). Sets the fabric-first work expected before commissioning.

Does the Boiler Upgrade Scheme apply in LA16 (Askam-in-furness)?

Yes. LA16 (Askam-in-furness) is in England, where the Boiler Upgrade Scheme (BUS) pays £7,500 toward an air-source heat pump install. The grant is administered by Ofgem and deducted by the installer at the point of invoice — you never see the cash. To qualify, the property must be owner-occupied or privately rented, have a valid EPC issued in the last 10 years, and have no outstanding loft-or-cavity insulation recommendation on the EPC (unless an exemption is documented). In our sample of LA16 (Askam-in-furness) EPCs the median rating is band D, which means most homes need to clear at least one insulation recommendation before the installer can claim the grant.

Typical install cost in LA16 (Askam-in-furness)

Pre-grant install costs in LA16 (Askam-in-furness) typically run £8,000 to £14,000 for a 5–10 kW air-source unit, in line with UK averages — labour rates in E12000002 sit close to the national mean. After the £7,500 BUS deduction most LA16 (Askam-in-furness)homeowners pay £1,500 to £6,500 out of pocket. The figure within that range that applies to your property depends on three things: heat-loss sizing (set by floor area, fabric and air-tightness), radiator upgrades (most pre-2000s homes need at least one or two changed), and hot-water cylinder provision. An MCS-certified engineer issues the binding quote after a heat-loss calculation per BS EN 12831.

What this means for your home

Whether a heat pump is a good fit for your specific home in LA16 (Askam-in-furness)depends on three factors the EPC alone can’t answer: roof + outdoor space for the external unit, radiator sizing throughout the heating circuit, and your current heating fuel + tariff. Propertoasty’s free pre-survey check combines your address, an EPC pull, the Google Solar API’s roof data, and a floorplan vision analysis to produce an installer-ready report — typically takes about five minutes.

Run a free pre-survey check on your home — installer-ready report, BUS-eligibility verdict, sizing range, and a list of MCS-certified installers covering LA16 (Askam-in-furness).

How LA16 (Askam-in-furness) compares

Compared with the England + Wales average band-D share of roughly 45%, LA16 (Askam-in-furness)’s 50% sits at or above the national midpoint. Bands E and worse — typical pre-1930s homes without significant retrofit — make up 15% of the local sample, which compares to the E&W average of around 22%.

Sources

  1. GOV.UK — Boiler Upgrade Scheme — accessed May 2026
  2. Ofgem — Boiler Upgrade Scheme guidance — accessed May 2026
  3. MCS — Find an installer — accessed May 2026
  4. GOV.UK — Find an energy certificate (EPC Register) — accessed May 2026
  5. Energy Saving Trust — Air source heat pumps — accessed May 2026

EPC aggregate data contains public sector information licensed under the Open Government Licence v3.0 (© Crown copyright and database right).