Heat pumps in Salford: 2026 grant + cost guide

What the EPC data shows for Salford

We’ve aggregated the current Energy Performance Certificate band for 103,501 properties in Salford, drawn live from the GOV.UK EPC Register. The median home in our sample sits at band C, with 44% falling into band C and 25% in band B. Around 31% of homes are at band D or below — the cohort with the most realistic retrofit upside.

The typical Salford home

What the EPC data shows beyond the headline rating — useful context for sizing a heat-pump install.

• Floor area: median 71 m² (25th–75th percentile: 57–86 m²). Heat-pump sizing scales roughly with floor area — expect a 5–8 kW unit at the median.
• Current heating cost: median £610/yr (£332– £840 typical range). The number an installer’s running-cost saving projection sits against.
• Mains gas connection: 79% of properties. Mixed grid: heat-pump payback runs much shorter for the off-grid minority (oil / LPG).
• Property type mix: Detached 13%, End-Terrace 18%, Mid-Terrace 34%, Semi-Detached 29%.
• Dominant age band: England and Wales: 1950-1966 (15% of homes). Sets the fabric-first work expected before commissioning.

Does the Boiler Upgrade Scheme apply in Salford?

Yes. Salford is in England, where the Boiler Upgrade Scheme (BUS) pays £7,500 toward an air-source heat pump install. The grant is administered by Ofgem and deducted by the installer at the point of invoice — you never see the cash. To qualify, the property must be owner-occupied or privately rented, have a valid EPC issued in the last 10 years, and have no outstanding loft-or-cavity insulation recommendation on the EPC (unless an exemption is documented). In our sample of Salford EPCs the median rating is band C, which means most homes need to clear at least one insulation recommendation before the installer can claim the grant.

Typical install cost in Salford

Pre-grant install costs in Salford typically run £8,000 to £14,000 for a 5–10 kW air-source unit, in line with UK averages — labour rates in North West sit close to the national mean. After the £7,500 BUS deduction most Salfordhomeowners pay £1,500 to £6,500 out of pocket. The figure within that range that applies to your property depends on three things: heat-loss sizing (set by floor area, fabric and air-tightness), radiator upgrades (most pre-2000s homes need at least one or two changed), and hot-water cylinder provision. An MCS-certified engineer issues the binding quote after a heat-loss calculation per BS EN 12831.

What this means for your home

Whether a heat pump is a good fit for your specific home in Salforddepends on three factors the EPC alone can’t answer: roof + outdoor space for the external unit, radiator sizing throughout the heating circuit, and your current heating fuel + tariff. Propertoasty’s free pre-survey check combines your address, an EPC pull, the Google Solar API’s roof data, and a floorplan vision analysis to produce an installer-ready report — typically takes about five minutes.

Run a free pre-survey check on your home — installer-ready report, BUS-eligibility verdict, sizing range, and a list of MCS-certified installers covering Salford.

How Salford compares

Compared with the England + Wales average band-D share of roughly 45%, Salford’s 24% sits below the national midpoint. Bands E and worse — typical pre-1930s homes without significant retrofit — make up 7% of the local sample, which compares to the E&W average of around 22%.

Nearby towns we cover

Comparison data for areas near Salford— useful if your property sits on a boundary or you’re comparing across the wider region:

• Heat pumps in Manchester — North West, England.
• Heat pumps in Stockport — North West, England.
• Heat pumps in Oldham — North West, England.